Explore all Airports in Columbus Ohio

Columbus is the capital city of Ohio state and is listed as the 14th-most populous city in the United States. Covering a total area of 225.97 square miles, the city holds over 905,765 population.

Talking about the tourist attraction, Columbus features various city parks including regional parks, metro parks, Columbus Zoo and Aquarium, amusement park, water park, wetland research park and much more. Besides, the city is also famous for fairs and festivals as it has hosted Metallica, Slipknot, Red Hot Chilli Peppers and other reputable musical bands.

The transportation facilities available in Columbus city includes highways and airways. If you are planning to visit and enjoy the amenities, you can either take a flight or drive along the highways.

Today, we will explore the airway transportation facility by knowing all the major airports in Columbus Ohio.

Major airports in Columbus Ohio

There are two major international airports in Columbus Ohio and they are John Glenn Columbus International Airport (CMH) and Rickenbacker International Airport (TZR). Another airport called Bolton Field (TZR) is also among the airports in Columbus Ohio however, it is specially built for general aviation purposes.

John Glenn Columbus International Airport (CMH)6.4 miles9 minutes
Rickenbacker International Airport (LCK)16.3 miles22 minutes
Bolton Field Airport (TZR)13.1 mile16 minutes

Note: The distance and driving time are taken from Google Maps including the fastest route with the usual traffic.

Now, let’s explore these airports in detail with technical information, airlines, destinations and so on.

John Glenn Columbus International Airport (CMH)

John Glenn Columbus Int’l Airport (ICAO: KCMH, IATA: CMH, FAA LID: CMH) is one of the major airports in Columbus Ohio situated at an elevation of 815 ft (248 m) above mean sea level (AMSL). It is owned and operated by Columbus Regional Airport Authority.

john glenn columbus airports in columbus ohio aviatechchannel
John Glenn Columbus Int’l Airport (Airports in Columbus Ohio)

Major U.S airlines operate regular scheduled commercial flights to and from Columbus connecting to various major domestic destinations across the United States.

CMH Runway and Terminal Information

John Glenn Airport is equipped with two asphalt runways; Rwy 10R/28L and Rwy 10L/28R.

10R/28L10,114 ft (3,083 m)Asphalt
10L/28R8,000 ft (2,438 m)Asphalt

Talking about the terminal infrastructure, CMH features one terminal that holds 3 concourses with 34 total gates. Concourse A holds 7 gates, Concourse B accommodates 16 gates whereas 11 gates are available in Concourse C.

john glenn airport terminal aviatechchannel
John Glenn Airport Terminal (Airports in Columbus Ohio)

Airlines and Destinations

Air Canada ExpressToronto
Alaska AirlinesSeattle/Tacoma
American AirlinesPhoenix-Sky Harbor, Charlotte, Dallas/Fort Worth
Breeze AirwaysJacksonville, Tampa, West Palm Beach, Charleston, Hartford, Norfolk, Providence
Delta Air LinesDetroit, Atlanta
Frontier AirlinesTampa, Denver, Orlando
Southwest AirlinesTampa, Washington, Atlanta, Chicago-Midway, Denver, Fort Lauderdale, Fort Myers, Las Vegas, Nashville, Orlando, Austin, Baltimore, Dallas-Love, Phoenix-Sky Harbor, Houston-Hobby
Spirit AirlinesPensacola, Los Angeles, Fort Lauderdale, Orlando, Las Vegas
United AirlinesSan Francisco, Washington-Dulles, Chicago O’Hare, Denver, Houston-Intercontinental

Furthermore, regional carriers including United Express, Delta Connection and American Eagle also operate scheduled passenger flights to and from CMH.

CMH Technical Information

ELEVATION815 ft (248 m)
AREA2,265 acres (917 ha)
RUNWAY10R/28L (10,114 ft) – Asphalt Surface
10L/28R (8,000 ft) – Asphalt Surface

Rickenbacker International Airport (LCK)

Rickenbacker Int’l Airport (ICAO: KLCK, IATA: LCK, FAA LID: LCK) is also among the international airports in Columbus Ohio that is owned and operated by Columbus Regional Airport Authority. 

rickenbacker international airports in columbus ohio aviatechchannel
Rickenbacker Int’l (Airports in Columbus Ohio)

Residing at an elevation of 744 ft (227 m) AMSL, the airport offers scheduled commercial flights to various domestic destinations operated by Allegiant Air.

LCK Runway and Terminal Information

Rickenbacker Airport features two runways with the designation Runway 05R/23L and Runway 05L/23R.

05R/23L12,102 ft by 200 ftAsphalt/Concrete
05L/23R11,902 ft by 150 ftAsphalt

The airport features a passenger terminal that offers all the services including check-in, security, baggage claim area, waiting-section and so on.

Airlines and Destinations

At present, only Allegiant Air operates scheduled commercial flights to Destin/Fort Walton Beach, Jacksonville, Fort Lauderdale, Orlando-Sanford, Punta Gorda (FL), Sarasota and Tampa/St. Petersburg from LCK.

Furthermore, Allegiant Air also conducts seasonal flights to other leisure destinations such as Charleston, Myrtle Beach, Norfolk and Savannah.

LCK Technical Information

ELEVATION744 ft (227 m)
AREA4,342 acres (1,757 ha)
RUNWAY05R/23L (12,102 ft by 200 ft) – Asphalt/Concrete Surface
05L/23R (11,902 ft by 150 ft) – Asphalt Surface
Explore More Airports in the United States
Airports in Washington DC
International Airports in Tennessee
International Airports in Arizona
Airports Close to Galveston TX
Airports in Syracuse New York
Airports in Charlotte North Carolina
Airports near Charlottesville Virginia
International Airports in Oregon

Bolton Field Airport (TZR)

Bolton Field Airport (ICAO: KTZR, FAA LID: TZR) is a small public-use airport in Columbus Ohio that is specially built to facilitate general aviation activities. Residing at an elevation of 905 ft (276 m) AMSL, the airport supports the Columbus Aviation market.

TZR is an important airport for private pilots, aviation enthusiasts and area businesses. It is just 13.1 miles away from downtown Columbus which requires 16 minutes drive.

Bolton Field (Airports in Columbus Ohio)

The airport features a single asphalt runway with the designation Rwy 4/22 and a dimension of 5,500 ft by 100 ft (1,676 m by 30 m). Talking about area coverage, it covers a total area of 1,500 acres (607 ha).

Some major facilities offered by the Bolton Field Airport include:

  • One of 12 general aviation reliever airports in Ohio recognized in the National Plan of Integrated Airport Systems (NPIAS)
  • 5500’ x 100’ runway and 75’ wide parallel taxiway
  • Instrument Landing System (ILS)
  • Non-Directional Radio Beacon (NDB)
  • Automated Weather Observation System (AWOS)
  • Medium-intensity approach-lighting system
  • 90 T-hangars
  • Tie-downs
  • Ample aircraft parking aprons
  • Piston, turboprop, jet aircraft and helicopter friendly
  • 80+ based aircraft
  • Air Traffic Control service daily from 7:30 a.m. to 7:30 p.m.
  • U.S. Customs clearance by appointment
  • Onsite restaurant JP’s Barbecue Ribs
  • Pilot lounge and other amenities

TZR Technical Information

ELEVATION905 ft (276 m)
AREA1,500 acres (607 ha)
RUNWAY4/22 (5,500 ft by 100 ft) – Asphalt Surface


We discovered three major airports in Columbus Ohio which are John Glenn International Airport (CMH), Rickenbacker International Airport (LCK) and Bolton Field Airport (TZR). These three airports contribute almost US$12.9 billion in total economic impact.

For commercial passenger flights, CMH and LCK are the best options as they provide regularly scheduled flights conducted by major airlines of the United States. In comparison, CMH offers more services than LCK. On the other hand, TZR is a public-use airport that primarily facilitates general aviation activities.

Some Frequently Asked Questions (FAQs)

How many airports are in Columbus Ohio?

There are three airports in Columbus Ohio and they are John Glenn International Airport (CMH), Rickenbacker International Airport (LCK) and Bolton Field Airport (TZR).

Does Columbus Ohio have two airports?

Columbus Ohio features three airports out of which two (John Glenn Columbus International Airport, Rickenbacker International Airport) are international airports whereas the third one (Bolton Field Airport) is a public-use airport.

Where do you fly into for Columbus Ohio?

John Glenn Columbus International Airport (CMH) and Rickenbacker International Airport (LCK) offer scheduled commercial flights to various domestic destinations from Columbus Ohio. CMH is the best choice than LCK because major US airlines operate from CMH whereas only Allegiant Air operates from LCK airport.

What are the major airports in Ohio?

Cleveland-Hopkins International Airport (CLE), John Glenn Columbus International Airport (CMH), Dayton International Airport (DAY) and Rickenbacker International Airport (LCK) are the major airports in Ohio.

Previous articleAre there Airports in Tulum Mexico? Find out now.
Next articleDiscover 2 major international Airports in Tennessee (BNA, MEM)
Suman Karki
Suman Karki is the founder of the AviaTech Channel blog and YouTube Channel. He is a passionate aviation enthusiast and holds experience working as a Ground Operations Officer for Swissport International. He is currently serving as a Flight Data Feeder for FlightAware (a US-based company for Flight Tracking). Besides, he has worked as an aviation content editor for various aviation media.


Please enter your comment!
Please enter your name here